Tag Archives: Circuit Board

$Best Price>Aqua Rite PCB Main Circuit Board Replacement

Aqua Rite PCB Main Circuit Board Replacement

Aqua Rite PCB Main Circuit Board Replacement
Aqua Rite PCB Main Circuit Board Replacement

48gos

Aqua Rite PCB Main Circuit Board Replacement

The Aqua Rite is an automatic chlorine generator system for pool and spa sanitization. The Aqua Rite PCB Main Circuit Board Replacement is a circuit board for Aqua Rite and Aqua Trol Salt Chlorinator systems structured to furnish the existing chlorinators. It is wired to 120/240 VAC and installs directly inside the Aqua Rite or Aqua Trol Power center. A new circuit board is a necessary replacement if your current chlorinator no longer displays a digital reading. For most accurate performance, ensure a chlorinator’s circuit board in its excellence without any disorder.

A product of highlight:

The Aqua Rite automatically cleanses your pool by integrating PH and ORP sensors with chlorine distribution so that your pool is always balanced and clean. The Aqua Rite PCB Main Circuit Board Replacement is installed in the Aqua Rite control unit and communicates with the salt cell to effectively sanitize your pool water. If you need any replacement, Aqua rite circuit board is guaranteed to be congenial with any Aqua Rite control panel. With Aqua Rite’s advanced electrolytic technology, pint-sized ordinary salt turns into an endless supply of pure chlorine. Salt doesn’t evaporate so the cycle keeps repeating and requires minimal usage of salt.

Display Board for Aqua Rite Salt Chlorinator GLX-PCB-DSP

48gos

Hayward GLX-PCB-DSP Display PCB Replacement for Select Hayward Salt Chlorine Generators

 

Up keeping the Aqua Rite System:

To ensure maximum efficiency, open and inspect the cell every 3 months after cleaning the filter. The Aqua Rite PCB Main Circuit Board Replacement will remind you to do this by flashing the ‘Inspect cell” LED after 500 hours of operation. After the inspection of the cell, press the “diagnostic button” next to the display for 3 seconds to stop the flashing “Inspect cell” LED in the display and start the timer for the next 500 hours. The Aqua Rite electrolytic cell has a self cleaning feature subsumes into the electronic control’s logic. Mostly, the self cleaning action will keep the cell working at optimum efficiency. The cell may require periodic cleaning if the water in the pool is hard with high mineral content. The “Inspect cell” LED will show indications if the cell efficiency is decreased to 1.5% to 2% and proper service is required in such scenario. If the “Inspect cell” LED remains on after a thorough cleaning, the cell may be worn out and require replacement and causes you an additional expenditure.

A boon towards the techno:

The Hayward Aqua Rite Salt chlorine Generator ropes its Turbo cell which automatically converts simple salt into Chlorine. Once you have explored into the return line, plug the unit in and salt converts into chlorine to make you feel pleasant with fresh and disinfected pool water. Follow the directions and set up, Aqua Rite that is fitted with Aqua Rite PCB Main Circuit Board Replacement which will be your perfect solution for the pool owner who wants to save money and better experience by knowing the following benefits before purchase.

  • No buying and mixing of  olden days chlorine
  • You won’t get red eye, itching due to strong chlorine odor
  • It is up to 40,000 gallon capacity with superior water quality
  • It can be operated by anyone with low maintenance and operating cost

Hence the Hayward Aqua Rite chlorine generator seems to be pie-in-the-sky for pool owners who spend more time in swimming without bothering the water balance. With this wonderful, cost effective, health conscious product fitted with Aqua Rite PCB Main Circuit Board Replacement, your skin tone will not be changed, rather you will feel glassy and your water will always be cool and breathe new life into your mind and body especially during summer!.

48gos

Aqua Rite PCB Main Circuit Board Replacement

$Best>Circuit Board for Aqua Rite Salt Chlorinator GLX-PCB-RITE

Circuit Board Aqua Rite Salt Chlorinator GLX-PCB-RITE

Circuit Board Aqua Rite Salt Chlorinator GLX-PCB-RITE
Circuit Board Aqua Rite Salt Chlorinator GLX-PCB-RITE

48gos

Circuit Board for Aqua Rite Salt Chlorinator GLX-PCB-RITE

The process of salt water chlorination has now become a very common process which utilizes dissolved salt as a perfect source for entire chlorination system.  In the system there is production of sanitizing agents that are normally used to clean the swimming pools.  There can be circumstances in which it becomes a necessity to replace the parts of the salt chlorinators.  Circuit Board is one such component.  The electrolysis process is what completes the entire task by passing solution of salt water via electrolytic cell that in turns cause the conversion of salt into pure water as well as chlorine gas that can be converted into liquid chlorine.

Circuit Board Aqua Rite Salt Chlorinator GLX-PCB-RITE

The specialities of this technology have to be seen in detail.  It provides great safety to people and environment.  It offers lot of benefits in terms of relaxation, comfort, safety and health as well as well being.  It disinfects the pool automatically and makes safe, crystal clear and clean water.  It reduces the storage of chlorine and makes the handling of the entire process and system easier.  The salt water after treatment does not even cause irritation in eyes and doesn’t dry the skin out.  Millions of people use the Aqua Rite Salt Chlorinators due to its reliability and safe features.

There can be cases when the salt chlorinators fail, but this happens very occasionally.  The main reason behind the failure is the electrical surge.  In case, if the Circuit Board does not function, it is best to replace it.  The process to replace is very simple that there is no requirement of a professional to come to your home to do the replacement.  It can even be done by you in few steps.  Circuit Board for the Aqua Rite Salt chlorinator GLX-PCB-RITE can now even be ordered online.  Several tempting offers are also available.  The Circuit Board can be replaced very easily.

Few tips and warnings for the replacement

Circuit Board Aqua Rite Salt Chlorinator GLX-PCB-RITE

The first step is to turn the power off in timer box.  For this there will definitely be one circuit breaker where power can be switched off.  Unlatch lock to open its door to the control box Aqua rite salt chlorinator.  With the use of 5/16” socket, it is possible to remove the two screws which can secure cover panel to control box.  Take out this control panel and display Printed Circuit Board from main PCB.  Remove all yellow, blue, gray, white and violet cables from the main PCB.  It is best to use needle nose pliers to remove the cables.  Then remove black and red cables from black terminal which is located in box’s top right corner.  Loosen both screws which hold main PCB in position; these are not to be removed completely.  Slide old main PCB from control box and place fresh Circuit Board piece in control box.  Tighten the screws and attach new black and red cables from PCB to black terminal situated in box’s top right corner.  Attach the other cables in position to terminals that are labelled in specific colours.  Press display board back to main PCB and place cover of control box.  Tighten screws of cover and turn on power.  You will see the illuminated and power light as well as display.  Close door of chlorinator and enjoy its benefits.

48gos

Circuit Board for Aqua Rite Salt Chlorinator GLX-PCB-RITE