Pentair 472100 DDTC Temp.Control Board Assy.Models With DDTC Controller.
Those who love swimming might find it hard to go out in the pool when the weather is not suitable. Then they can do nothing but wait for right season to come so that they can resume their favorite sport. However, today with the advances in technology, they need not to worry anymore about the weather as a wide range of pool heaters are available are in the market. One of the most recommended and widely used are the Pentair heaters fitted with Pentair 472100 DDTC Temp.Control Board Assy. The functioning of this board is greatly enhanced by DDTC Controller.
Here we have to understand these both terms and how do these devices work. Before understanding this, we need to know what a spa/pool heater is. A spa/pool heater is device that is installed in a pool so as to heat up the water in it as per our requirements. Theses heaters work efficiently and much more effectively when fitted with Pentair 472100 DDTC Temp. Control Board Assy equipped and controlled by DDTC Controller.
What is a Pentair 472100 DDTC Temp. Control Board Assy?
This is a temperature control board that is capable of controlling pool/spa temperature to a minimum of 65° F. Here the DDTC Controller is the device that displays and controls the temperature. It is expanded as Digital Display Temperature Controller. The upper limit of the temperature set by this device is 104° F. Here one thing that should be noted that the device reads ‘Off’ for the temperature settings below65° F. The control board indicates the status of the system using LED lights and programmed error codes. The display shows the current temperature of the water returning to the heater. This depends entirely on the mode selected. It can be either in the ‘Pool’ mode or ‘Spa’ mode.
The heating function is taken care of by the device called ‘thermister’. It is a kind of sensor install on the inlet port of the water header of the heater. It is controlled by the Pentair 472100 DDTC Temp.Control Board Assy that allows it to work in conjunction with the internal microprocessor. This helps in the controlling the overall functioning of the heater The desired pool temperature can be easily set or changed by pressing the up-down arrow until the display on the DDTC Controller reads the temperature desired by you.
The heaters come with the factory preset with a pool temperature setting of 78° F. and a preset spa temperature of 100° F., and in the off mode setting. You can adjust this temperature according to your need very easily as it offers very user friendly interface. So, now don’t wait for right season to arrive because when you have pool heater fitted with Pentair 472100 DDTC Temp. Control Board Assy, you can jump it to pool and have fun irrespective of the weather. And not to forget the DDTC Controller that this control board is equipped with. Enhance your swimming experience with state-of-the-art technology brought to your service by Pentair.