Category Archives: PCB Main Board

$Best>Zodiac R0466700 Pcb Kit Power Center

Zodiac R0466700 Pcb Kit Power Center

48gos

Zodiac R0466700 Pcb Kit Power Center

 

-Zodiac R0466700 Pcb Kit Power Center-

How to Control Board Replacement for Your Furnace

You know that feeling of feeling in complete control and one step ahead always? Everyone wants to have that right? When it comes to heating your pool or home, it’s hard not to integrate the timely impact a furnace projects.  There is nothing like a faulty furnace during cold weather or at that time when a warm swim would automatically bring you utmost relaxation.

There are often two types of furnace control boards. The first is the igniter which controls the gas valve and a flame sensing circuit. The other is one referred to as an integrated furnace control. These two perform close to the same tasks but the integrated furnace control also controls the blower in both heating modes and air conditioning together with providing on board diagnostics.

Replacement or Repair for your furnace control board

It’s completely okay to try to cut down on expenses by opting to repair your furnace control board but while this may appeal for the time being, the long term impact might be much more expensive. This can be in terms of consumption where you might find that your furnace improper functioning is causing loss of heat. So when it makes better sense to replace a defective control board, this is how to go about it:-

$Best>Zodiac Jandy Pool/Spa Combo Automation Bundle iAquaLink IQ904-PS

Zodiac Jandy Pool/Spa Combo Automation Bundle iAquaLink IQ904-PS.

Zodiac Jandy PoolSpa Combo Automation

48gos

Zodiac Jandy Pool/Spa Combo Automation Bundle iAquaLink IQ904-PS

 

 

The Various Pool and Spa Heating Systems to Consider

Basically, the heating system for your pool or spa is determined by a variety of factors such as budget, needs, desires and physical location of the same. In regard to this, there are four main options of pool or spa heating systems:-

Solar heating system

This is heating obtained directly from the sun and the greatest advantage is that it is completely free. Through direct heat transfer, water from your spa or pool is circulated through the collector often situated on the roof.

Most solar heating systems incorporate a PCB controller that flow water to the roof when there is enough sunshine.

With a solar heating system, the heat collected is dependent on the size of the collector meaning that the larger the collector, the more heat will be gained.

$Best>Zodiac Pool Systems 7306 PCB Repair Kit for Swimming Pool

Zodiac Pool Systems 7306 PCB Repair Kit for Swimming Pool

Zodiac Pool Systems 7306 PCB Repair Kit

48gos

Zodiac Pool Systems 7306 PCB Repair Kit for Swimming Pool

Why your Pool or Spa Heating System Needs Proper maintenance

Let’s face it when you built your pool or spa facility, you spent a fortune on your heating system and if you are going to make the most out of it, proper maintenance should not be overlooked.  While all the components comprising of the heating system including the boiler, radiators, evaporators and pcbs independently determine the overall efficiency, appropriating for maintenance cannot be a luxury. I mean would you comfortably drive for over 150,000 miles without changing your engine oil? Proper maintenance means you can luxuriously avoid hefty and unnecessary repair costs.

Besides helping lower repair costs, here are additional reasons why maintenance for your heating system is vital:-

$Best>Jandy Zodiac IQ20-RS iAquaLink PCB Board IQ20RS

Jandy Zodiac IQ20-RS iAquaLink RS iAquaLink 2.0 Interface Kit and PCB Board IQ20RS.

Jandy Zodiac IQ20-RS iAquaLink RS iAquaLink 2.0

48gos

Jandy Zodiac IQ20-RS iAquaLink RS iAquaLink 2.0 Interface Kit and PCB Board IQ20RS

How to Shop for a Pool or Spa Heating System

In often times, you find that most people tend to go for a spa or pool heating system entirely based on cost effectiveness. As far as economy is concerned, it is important to note that there are far more determining factors when it comes to buying a pool or spa heating system.

Planning to purchase a heating system for your pool or spa requires much deliberation in that, in the case of an indoor pool or spa, the pool water must be heated, pool room dehumidified and room air heated during winter. So it goes without saying that all these issues have magnitude to increase the energy costs.

Tips to help ensure that you purchase your heating system on a budget:-

Ensure the system is the right size:

When it comes to heating equipment, it is important to note that bigger is not always determinant. Be careful with contractors out to sell you bigger units that you need as this will not only cost more to purchase but a lot more to especially service.

Go for a professional contractor

With so many potential contractors to consider, it is important to consider all aspects including expertise and professionalism. A licensed and reputable contractor comes in handy to makes sure that the heater installation is quality especially when it comes to the pcb units.

Compare prices

Sometimes we are too busy we forget to compare service providers. Visit several heating retail centers selling energy efficient systems making sure to compare prices and asking all questions that are of concern to you. Your pool or spa heating quality is of prime importance but so is the budget with purchasing and maintenance.

Final thoughts

We are talking about a vital decision that poses long term implications. Remember your decision to install your spa or pool heating system means giving your utility companies a reason to send you an additional bill each month. It is also important to know that the combined costs there is of owning your spa or pool heating system will always exceed the initial cost of buying it by far. In essence, when contemplating on buying heating system, you can never afford to rush into your decision. It’s not a decision you can easily tear out and start all over but one you will have to live with for all eternity.

48gos

Jandy Zodiac IQ20-RS iAquaLink RS iAquaLink 2.0 Interface Kit and PCB Board IQ20RS

$Best>Zodiac R0366800 Power Control Board Replacement for Zodiac Jandy Lite2LJ Pool and Spa Heater

Zodiac R0366800 Power Control Board Replacement for Zodiac Jandy Lite2LJ Pool and Spa Heater48gos

Zodiac R0366800 Power Control Board Replacement for Zodiac Jandy Lite2LJ Pool and Spa Heater

Zodiac R0366800 Power Control Board Replacement for Zodiac Jandy Lite2LJ Pool and Spa Heater.

Most of the people who own a Spa Heater in their house know what the most depressing sound in the world is.  To be more specific it is exactly to find that the spa has broken down after they had returned to their home after a long days work.  In such a situation most of the people try to reset the breaker, check the connection, and they find that nothing has happened.  Deep in their mind they clearly know what the exact reason for this issue is.  Control Board is usually shot on most of the cases and they need to find the best power control board in the market.

Control Board is the brain of Spa Heater

Control Board is usually considered as the brain of the Spa Heater.  This is the device that controls the main functions of all the units like the pump or the heating element.  In most of the cases when ever these small devices burn out it is more economical to replace the smaller units rather than the entire board.  The smaller units are often custom made to fit in all devices.

$>Tiger River Hot Springs Electronic Heater PCB Board PC 74618 77119

Tiger River Hot Springs Electronic Heater PCB Board PC 74618 7711948gos

Tiger River Hot Springs Electronic Heater PCB Board PC 74618 77119

Tiger River Hot Springs Electronic Heater PCB Board PC 74618 77119.

Once in a while, all of us like to go to spa to refresh ourselves.  However, what forms the most important part of the spa process is the temperature to which the water is heated in the spa.  Too high or too low temperature of spa can not only ruin the enjoyment but also make it worthless and irritating.  With the advent of state-of-the-art technology, setting the temperature of spa water is not a big problem with wide range of spa heaters available in the market.  One of the most demanded of these is Tiger River Hot Springs Electronic heater which is controlled by Tiger River Hot Springs Electronic Heater PCB Board PC.

What is an Electronic Spa Heater?

Spa is done in a hot tub that roughly seems like a small pool full of heated water.  It is used either for hydrotherapy or relaxation.  They are different from the normal tubs and may accommodate more than one person at a time.  They are usually located outdoors.  It doesn’t require changing the water after every use; however, it is kept sanitary using methods similar to those used for swimming pools.  The best of enjoyment is guaranteed by Tiger river spas which are aided by Tiger River Hot Springs Electronic Heater PCB Board PC.

What is Tiger River Hot Springs Electronic Heater PCB Board PC?

As the name tells, it is control board that is designed specifically to control and enhance the working of electronic spa heater.  It is the main component that helps the various parts of a spa heater to communicate with each other.  The PCB is responsible for controlling the heat-up times of a heater.  Not only this, it is only responsible for increasing or decreasing the life of heater depending upon its quality.  In simple words, the PCB is said to be the master mind behind all the functioning that a heater delivers.

And when this PCB is Tiger River Hot Springs Electronic Heater PCB Board PC, you need to give up all your worries because it is designed perfectly.  It is programmed to set the temperature in desired range.  You will find user-friendly interface attached to the heater which will display the current temperature of water.  This can be adjusted by pressing switches connected for the purpose.

Therefore, if you are looking for a replacement for PCB in your spa heater, the Tiger River Hot Springs Electronic Heater PCB Board PC is the best that you can get.  Just go and grab it for the best spa experience.  It is designed so well that it will provide a new life to your spa heater.  Not only that, it also lowers the operation cost and enhances the performance of the heater.  It retains that temperature of the water from warm to hot that is usually 38 to 42 °C.  However, it can be changed as per the requirement.  The control board is one of the best of those available in the market.  With this PCB, your heater will deliver a performance that will surprise you.

48gos

Tiger River Hot Springs Electronic Heater PCB Board PC 74618 77119

Best$>PowerStar AE125 PCB Control Board #93-793844 for Poly Units

PowerStar AE125 PCB Control Board #93-793844 for Poly Units48gos

PowerStar AE125 PCB Control Board #93-793844 for Poly Units

PowerStar AE125 PCB Control Board #93-793844 for Poly Units.

PowerStar AE125 PCB Control Board is an advanced version of its older generation for any PowerStar AE125 starting with serial number of 60A 800000 or Greater  which is used with Poly Units Tankless Water Heaters.  This is a Bosch tankless replacement part and it is non-refundable after delivery.   PowerStar AE125 is an Electric Tankless Water heater which is highly recommended to use for a whole house.  This is the best replacement unit for the conventional 40 gallon electric water heater.  PowerStar AE125 is can supply instant hot water service whenever it  is required and it will activate hot water condensation whenever there is a requirement sensed due to the inbuilt PCB circuit features.

Frequent upgradation of circuit board is always part of business because this is a must to do after collection of various market feedback and suggestions.  Sometimes recurring faults also lead to improve the circuit design.  The Tankless Water Heating system PowerStar AE125 also underwent various upgradations along with the PowerStar AE125 PCB Control Board.   As everybody in the Tankless Water Heater market know the fact that previously PowerStar AE125 heaters were using copper canisters and in 2007 it were upgraded to Poly Units. The poly tanks are comparatively very durable than copper canisters and it has more expansion and contraction abilities.  Also it is not prone to mineral deposit built up.

The new PowerStar AE125 PCB Control Board is an improved version of the older version and can be easily fitted with the new PowerStar AE125 Tankless Heater system.   The Tankless Heater System is 3 inch smaller than the previous model and is designed to fit with one major application and one sink at a time.  This is a recommended unit in Northern region of America, where the ground water is cooler than the rest of the area.  The sensor in the PCB will activate only when there is a demand of hot water is notified.  The Poly Units are fitted with the heating copper elements and can be mounted anywhere in the house.  Easy to assemble and light weight is the advantage of poly cabin is less in weight.

The PowerStar AE125 Poly Units has to be connected with copper water piping, with a minimum length of 3 to 4 feet and also copper water piping is required before connecting with any pex piping to resist the expansion of pipe.   The Tankless AE125 is a small device and good for home and apartments.   Hot water on demand is the plus point of this system and more improved features are incorporated in latest replacement PCB of PowerStar AE125 PCB Control Board to give you an uninterrupted hot water service.  PowerStar AE125 can be fitted more than one place in the house, which can give instant hot water.  Since the unit is very small, it is easy to place in any convenient location house without interrupting the interior style.  Even if large central water heater is being in use, these instant Tankless water heaters are more convenient to have continued hot water, especially when your house is located in an extreme cold climate location.

48gos

PowerStar AE125 PCB Control Board #93-793844 for Poly Units

$Best>PowerStar AE125 PCB Control Board 93-793778 for Copper Can Units

PowerStar-AE125-PCB-Control-Board-93-793778-for-Copper-Can-Units48gos

PowerStar AE125 PCB Control Board #93-793778 for Copper Can Units

PowerStar AE125 PCB Control Board #93-793778 for Copper Can Units.

PowerStar AE125 PCB Control Board is a replacement Power Circuit Board for PowerStar AE125 starting with a serial number of 60A 000000 or below.  The PowerStar AE125 Power Circuit Board with No. 93-793778 is used Copper Canisters Units in AE 125.  The PCB 125 printed circuit board is used to regulate the thermostatic condition of tankless water heater generally used for instant hot water.  The temperature with the help of this printed board would be manually controlled and maintained between 86-131 degrees.

The Copper Canister Units in a tankless heating system will have single phase electric power copper heating elements to supply hot water when it is required.  Tankless water heaters are much in demand today due to its popularity as it can offer continuous flow of hot water on demand.  It is instantaneous as the water heats up the moment it flow through the Copper Canister Units.   The advantage of this mechanism is that there is no need to store the water except the place where the heat exchange coil is placed.   Copper heat exchangers are fitted in the Copper Canister Units and this will generate the heat and thus the water flows over the device will get heated up.

PowerStar AE125 PCB Control Board is manufactured to be used in Copper Can Units.   This is a supreme product and priced economically cheaper.  Shipped free of cost and all parts required for the installation are included in the package.   No refund is available once the product is sold out.   But the PCB AE125 is considered as the best replacement PCB for your electric storage tank water heater.   The PCB also can be used for the tankless water heater replacement Printed Circuit Board and can be installed easily anywhere.  It is simple to use, people with little technical/electrical wiring knowledge can undertake the replacement job.

It works smoothly and reduces the cost of electricity bill by reducing the energy consumption being utilized by the copper elements fitted inside the Copper Canister Units.  The PowerStar AE125 PCB Control Board is designed to work perfectly well and guaranteed to provide long lasting service.  It can effectively control the flow of electric energy to the copper elements and regulate the heat at the time of requirements.  The features acts like a responsive mechanism and sense the heat requirements and activate the energy mode.  The thermal cut out switch provided with the PCB enhances the safety features of the tankless water heater.   This in turn extends the life of heating elements and avoids frequent replacement.

ith the installation of PowerStar AE125 PCB Control Board for your Copper Canister Units, you shall be saving a quite lot of energy bills and frequent break downs.   The PCB AE125 fitted tankless heater can be installed anywhere at your home.  Also it is to be noted that new AE12B PCB has significant improvement than its previous models of PCB AE125.   The overall height of the unit is reduced by 3 inches due to the redesigning of the PCB board.  The PCB AE125 is designed to use only cold water.

$Price Review Pentair 472100 DDTC Temp Control Board Assy Models+DDTC Controller

Pentair-472100-DDTC-Temp.-Control-Board-Assy.-Models-With-DDTC-Controller48gos

Pentair 472100 Digital Display Temperature Controller Board Replacement MiniMax NT Series Pool and Spa Heater

Pentair 472100 DDTC Temp.Control Board Assy.Models With DDTC Controller.

Those who love swimming might find it hard to go out in the pool when the weather is not suitable.  Then they can do nothing but wait for right season to come so that they can resume their favorite sport.  However, today with the advances in technology, they need not to worry anymore about the weather as a wide range of pool heaters are available are in the market.  One of the most recommended and widely used are the Pentair heaters fitted with Pentair 472100 DDTC Temp.Control Board Assy.  The functioning of this board is greatly enhanced by DDTC Controller.

Here we have to understand these both terms and how do these devices work.  Before understanding this, we need to know what a spa/pool heater is.  A spa/pool heater is device that is installed in a pool so as to heat up the water in it as per our requirements.  Theses heaters work efficiently and much more effectively when fitted with Pentair 472100 DDTC Temp.  Control Board Assy equipped and controlled by DDTC Controller. 

What is a Pentair 472100 DDTC Temp.  Control Board Assy?

$Price Review Pentair 42002-0007S Control Board Kit Replacement NA&LP Series PoolSpa Heater Electrical Systems

Pentair-42002-0007S-Control-Board-Kit-Replacement-NA-and-LP-Series-PoolSpa-Heater-Electrical-Systems48gos

Pentair 42002-0007S Control Board Kit Replacement NA and LP Series Pool/Spa Heater Electrical Systems

Pentair 42002-0007S Control Board Kit Replacement NA and LP Series Pool/Spa Heater Electrical Systems. 

Swimming is a sport that is enjoyed all across the world.  However, the fun may be hampered by the season outside.  But now it’s not impossible to extend your swimming season.  With fantastic Pentair Pool and Spa Heaters in the market, you can make sure that your swimming season lasts longer.  These heaters are fitted with Pentair 42002-0007S Control Board ensure that your pool system works well to provide you all the comfort that you deserve.  It is very efficient control board kit replace for the pool heater.

The manufacturers have designed this Replacement NA kit to fit in very well with the Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems as a replacement kit.  However, it is so flexible that it also fits effectively into Pentair Sta-Rite Max-E-Therm NA and LP-Series pool and spa heater electrical systems.  This one of the rarest control boards that flexibly fits into almost all kinds of pool heating systems and communicate efficiently with them to heat the water in the pool as per you requirements.  This incredible circuit board measures no more than 6-inch length by 6-inch height by 6-inch width.

What is a Pool Heater?

Pool/Spa heater is a device that is designed to make the water in your pool hot as per your requirements.  The Pentair MasterTemp heater is a compact system that is not only lightweight but is equally efficient.  It is also paired with Pentair multifunction temperature controller to ensure proper functioning of the heater.  It is also equipped with a direct ignition device, HSI (hot-surface ignition), therefore, eliminating the need for a standing pilot.  And of course Pentair 42002-0007S Control Board forms necessary part of this heating equipment, which is responsible for all the communication within the device.

The MaterTemp heater requires only 120/240 VAC 60Hz to operate.  It has a unique ability of direct schedule 40 PVC plumbing connections.  The LP Series Pool/Spa Heater is something that makes this system work just up to your expectations.

How does this circuit control board works together with the pool heating system?

The LP Series Pool/Spa Heater works by integrated pool/spa heating communication system with the help of installed Pentair 42002-0007S Control Board.  This board is so incredible that it aids the heater to fast heat-up times and makes the water in pool as per your requirements within no time.  In addition to this, it lowers the operation costs and add up the life of the heater and the pool system.

This control board not only provides this additional functionality to the Pentair MasterTemp NA and LP Series Pool and Spa Heater Electrical Systems but also to the Pentair Sta-Rite Max-E Therm NA and LP-Series pool and spa heater electrical systems.  So don’t wait inside your house waiting for the swimming season to come again but just install this incredible heating system and enjoy your favorite sport in any season.

48gos

Pentair 42002-0007S Control Board Kit Replacement NA and LP Series Pool/Spa Heater Electrical Systems