Aqua Rite PCB Main Circuit Board Replacement
The Aqua Rite is an automatic chlorine generator system for pool and spa sanitization. The Aqua Rite PCB Main Circuit Board Replacement is a circuit board for Aqua Rite and Aqua Trol Salt Chlorinator systems structured to furnish the existing chlorinators. It is wired to 120/240 VAC and installs directly inside the Aqua Rite or Aqua Trol Power center. A new circuit board is a necessary replacement if your current chlorinator no longer displays a digital reading. For most accurate performance, ensure a chlorinator’s circuit board in its excellence without any disorder.
A product of highlight:
The Aqua Rite automatically cleanses your pool by integrating PH and ORP sensors with chlorine distribution so that your pool is always balanced and clean. The Aqua Rite PCB Main Circuit Board Replacement is installed in the Aqua Rite control unit and communicates with the salt cell to effectively sanitize your pool water. If you need any replacement, Aqua rite circuit board is guaranteed to be congenial with any Aqua Rite control panel. With Aqua Rite’s advanced electrolytic technology, pint-sized ordinary salt turns into an endless supply of pure chlorine. Salt doesn’t evaporate so the cycle keeps repeating and requires minimal usage of salt.
Up keeping the Aqua Rite System:
To ensure maximum efficiency, open and inspect the cell every 3 months after cleaning the filter. The Aqua Rite PCB Main Circuit Board Replacement will remind you to do this by flashing the ‘Inspect cell” LED after 500 hours of operation. After the inspection of the cell, press the “diagnostic button” next to the display for 3 seconds to stop the flashing “Inspect cell” LED in the display and start the timer for the next 500 hours. The Aqua Rite electrolytic cell has a self cleaning feature subsumes into the electronic control’s logic. Mostly, the self cleaning action will keep the cell working at optimum efficiency. The cell may require periodic cleaning if the water in the pool is hard with high mineral content. The “Inspect cell” LED will show indications if the cell efficiency is decreased to 1.5% to 2% and proper service is required in such scenario. If the “Inspect cell” LED remains on after a thorough cleaning, the cell may be worn out and require replacement and causes you an additional expenditure.
A boon towards the techno:
The Hayward Aqua Rite Salt chlorine Generator ropes its Turbo cell which automatically converts simple salt into Chlorine. Once you have explored into the return line, plug the unit in and salt converts into chlorine to make you feel pleasant with fresh and disinfected pool water. Follow the directions and set up, Aqua Rite that is fitted with Aqua Rite PCB Main Circuit Board Replacement which will be your perfect solution for the pool owner who wants to save money and better experience by knowing the following benefits before purchase.
- No buying and mixing of olden days chlorine
- You won’t get red eye, itching due to strong chlorine odor
- It is up to 40,000 gallon capacity with superior water quality
- It can be operated by anyone with low maintenance and operating cost
Hence the Hayward Aqua Rite chlorine generator seems to be pie-in-the-sky for pool owners who spend more time in swimming without bothering the water balance. With this wonderful, cost effective, health conscious product fitted with Aqua Rite PCB Main Circuit Board Replacement, your skin tone will not be changed, rather you will feel glassy and your water will always be cool and breathe new life into your mind and body especially during summer!.